kubota bx25 hydraulic filter,kubota l275 hydraulic filter,kubota b2150 hydraulic filter

With the development of hydraulic technology, people pay more and more attention to the control of oil pollution in the hydraulic system. As an important component to control oil pollution, the filter is more and more widely used in the hydraulic system.

It is reported that in the hydraulic systems of aerospace, metallurgy and mining, engineering vehicles, ground transportation, energy supply, chemical, textile, and other facilities and equipment, filters are an important guarantee for their advanced functions, safety, and reliability and extended service life. For hydraulic accessories, we use more hydraulic filters, more oil suction filters, high-pressure filters, oil return filters, and so on.

Requirements for using hydraulic filter

1. Climatic factors will affect the filtering effect. If there are many willows in the use environment of hydraulic filter, corresponding measures need to be taken in the air conditioning design, such as changing the height of the air inlet or adding a protective net at the air inlet.

1. Increase the filtering area of the filter. If the area is large, it will contain more dust and have a long service life. And the filtering area is large, the speed of airflow through the material is low, and the resistance to the filter is small.

1. Adjust the efficiency of filters at all levels; If the filtering efficiency of the filter is relatively low, the dust can be kept in the prefilter by adjusting the filtering efficiency of the prefilter.

Misunderstanding of hydraulic filter maintenance

1. Open and clean it every day

In the general environment, the hydraulic filter may not need to be cleaned every day. If it is disassembled too frequently, it is easy to mix dust and wear the cylinder and other accessories. The internal structure of the paper dry filter is composed of multi-layer fibers, and the spatial three-dimensional structure realizes greater pollution acceptance and higher filtration accuracy through three-dimensional orientation.

Through the professional test of the engine manufacturer, the filtering effect of the new filter is sometimes not as good as that of the old filter. Generally, the filtering effect of 60% stolen filter is the best. The dust can prevent the dust from entering the air inlet port of the filter. So don't rush to clean the filter every day. It's best to wait until the filter alarms.

1. Pat the filter hard

Don't beat the filter hard. Expect the cleaner the better. Since the filter is a little stolen, the filtering effect is better. Why toss back and forth? It can't hurt the filter paper? When blowing, it blows from inside to outside. In turn, it helps, and the dust that was originally prevented is blown in.

We are a professional kubota bx25 hydraulic filter,kubota l275 hydraulic filter,kubota b2150 hydraulic filter exporter, supplier, wholesaler, our hydraulic filters satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.